Hi Stan,
I have created a combination statistic filter as follows:
Combine : ODD/EVEN
+
History Sum Root 0
+
History Sum Root 1
In total (3) combinations
- I am testing this filter for the Draw date 25/5/2017 for the Australian Powerball lotto draw:
- The actual values for the combination filter for that draw was as follows:
ODD/EVEN: 3:3 RATIO
History Sum Root value for Level 0 = 9
History Sum Root value for Level 1 = 3
As per the properties table below
I then ran a Winning Number Analysis over the interval of 25 draws
and selected the COMBINED STATISTICS filter for this analysis
with the results as below:
As you can see from this analysis the combination in this filter below
is not present:
ODD/EVEN: 3:3 RATIO
History Sum Root value for Level 0 = 9
History Sum Root value for Level 1 = 3
The problem I have is when I REJECT those combinations from the analysis above in applying this Combinations Filter
I do not have the winning ticket as below:
If you could explain why this is happening that would be appreciated.
Thanks Stan.