Page 1 of 1
Winning number history
Posted:
Mon Oct 23, 2006 4:30 pmby 2scoops
Hi Stan
Just another question, is the following the same filter?
If I set the winning number history to filter ±35
and
If I do the following compound filter:
History 0 to -11 ±35 but 0-3pass
History 0 to -11 ±25 but 0-4pass
History 0 to -11 ±20 but 0-5pass
History 0 to -11 ±15 but 0-4pass
History 0 to -11 ±10 but 0-6pass
History 0 to -11 ±5 but 0-6pass
History 0 to -11 ±0 but 0-2pass
All the above must pass the filter
Cheers
2scoops
Posted:
Mon Oct 23, 2006 4:49 pmby stan
i don't think those two filters are equal. what are you trying to achieve with this?
Posted:
Tue Oct 24, 2006 8:12 amby 2scoops
Hi Stan, this is my aim, I am trying to create a filter that will use the following settings:
Max 0 - 3 colums ±35
Max 0 - 4 colums ±20
Max 0 - 6 Colums ±10
Max 0 - 6 Colums ±5
Max 0 - 2 Colums ±0
How would you go about in achieving this filter
2scoops
Posted:
Tue Oct 24, 2006 2:46 pmby 2scoops
Hi Stan
How would you set the filter up for the following:
WNH ±35 Colums to pass = 0 - 2
WNH ±20 Colums to pass = 0 - 4
WNH ±15 Colums to pass = 0 - 4
WNH ±10 Colums to pass = 0 - 6
WNH ±05 Colums to pass = 0 - 3
WNH ±00 Colums to pass = 0 - 1
2scoops
Posted:
Tue Oct 24, 2006 3:06 pmby stan
just use compound filter as you've already suggested. i'd use 'and' as the logical condition.
Posted:
Tue Oct 24, 2006 3:28 pmby 2scoops
If I do as you suggested I loose the winning number.
End up with alot of 4's
Posted:
Tue Oct 24, 2006 4:59 pmby stan
try to relax the at least x to y must pass conditions. the winsum plugin will show you the most frequent combinations
Posted:
Wed Oct 25, 2006 8:58 amby 2scoops
Thanks Stan
Another question, how do you filter for + or - movement
eg: on average there are 2 - 6 of the 11 colums -,
and 6 - 8 of the 11 colums +
How to set filter
Posted:
Wed Oct 25, 2006 9:50 amby Bobes
[quote=2scoops]
Another question, how do you filter for + or - movement
eg: on average there are 2 - 6 of the 11 colums -,
and 6 - 8 of the 11 colums +
[/quote]
Set the following
The difference in "2" to "6"
is at most "-xx" to"-1"
AND
The difference in "6" to "8"
is at most "0" to "+yy"
Posted:
Wed Oct 25, 2006 1:15 pmby Red Devil
[quote=2scoops]
Thanks Stan
Another question, how do you filter for + or - movement
eg: on average there are 2 - 6 of the 11 colums -,
and 6 - 8 of the 11 colums +
[/quote]
2 Scoops,
I don't know if you read them but I made some posts back in April/May concerning this subject, "Making Estimates" & "At Least & Difference Columns". This is the primary reason for posting my spreadsheet last week and for asking Stan to "Fix" the difference settings in WNHistory. Glad to see someone else is on the same wavelength.
Posted:
Wed Oct 25, 2006 4:42 pmby 2scoops
Thanks Red Devil
Just trying to play my part