Hi Stan, the smallest value for input % is currently 1,00. It would be good if the input can also be changed to less than 1%.
For example, I have 13,697 tickets in the package, including 1 x 5 ticket from 6. This ticket has a share of 0,000073008688033876 % (= 1 / 13.697). So I would have to type: 0,00007% 5 of 6
So a small cover always makes sense if you have reduced the tickets first and have a high hit rate. This was what I had achieved in my example above! However, I could then set the filter only to 1%. This has the disadvantage that then 540 tickets to play are determined - but they are too many.
Therefore, a reduced input as suggested would be very valuable. Each user must know, of course, that this makes sense only if you have few tickets to choose from.
So I looked into it and there's a problem with the spinner buttons - I can't lower the minimum allowed value below 0.01 and keep the spinner button for convenient mouse increments/decrements at the same. The best I could do is lowering the min value to 0.01. But you need to type that value using keyboard instead of using spinner buttons.